RTD sensor for 1/2" NPT Threaded Thermowell

  • Model: PT100-TW1/2NPT

Ask a Question

Starting at: $31.99

Please Choose:





Add to Cart:

This PT100 RTD sensor is designed to fit into a 1/2 NPT threaded thermowell. The probe body is made of stainless steel. The mounting is 1/2" NPT thread. This probe has a detachable connector with a spring lock. The detachable cable is convenient for systems that need to be moved for cleaning. It reduces the possibility of breaking the cable when the tank is moved around. 70 mm and 170 mm sensor tip cable length (see below) are offered, please contact us for different length options.


This item includes 1 gram thermal grease (right in the above picture). This grease can help increase the heat conductivty between the sensor tip and the thermowell wall.
 

The sensor cable length (from the sensor tip to the end of sensor tip cable). Top is 170 mm; bottom is 70 mm. For details, please check the pictures here: 70 mm Pic #1, 70 mm Pic #2, 170 mm Pic #1, 170 mm Pic #2

The sensor tip will be dropped inside the thermowell, and get touch with the bottom of thermowell. This sensor can fit the thermowell which ID is larger than 4mm (5/32").

Note: Silicone gasket/cap for this probe connector is available here.

Following cable options are offered. Please contact us for questions.  

Standard Teflon Cable, Braided Cable and Silicone Braided Cable (Click picture to enlarge)

 
Silicone braided cable with XLRCON-M connector (male panel mount)

 
Braided Cable with XLRCON-M connector (male panel mount)

1. Standard teflon cable: The standard cable supplied with sensor is shown in the product profile picture. It is three color-coded conductor cable with two layers of TEFLON insulation that is very strong and weather resistant. 6ft (1.8m) cable option is offered in this listing. 12ft (3.6m) cable option is available here

2. Braided cable with RTD connector: The braided cable added an extra layer of metal braid between the TEFLON layers for more protection. Both ends come with our RTD connector. The mating connector has a 2 ft 3 inch (700mm) of TEFLON cable installed. Users can use this cable without any soldering work. 8ft (2.4m) cable option is offered in this listing. 12ft (3.6m) cable option is available here

3. Braided cable with XLRCON-M connector (male panel mount): This option is similar to "Braided cable with RTD connector", but it comes with one female 3-pin XLR connector on the one end of the braided cable. The other end is our standard RTD connector. The mating connector has a 2 ft 3 inch (700mm) of TEFLON cable installed. Its mating cable comes with one male 3-pin XLR connector. 12ft (3.6m) cable option is offered in this listing. 8ft (2.4m) cable option is available here

4. Silicone braided cable with XLRCON-M connector (male panel mount): This silicone braided cable has an extra layer of metal braid between the outside silicone insulation and inside Teflon insulation for better protection and durability. It is stronger than silicone cable without braiding on the market. The mating connector has a 2 ft 3 inch (700mm) of TEFLON cable installed. Its mating cable comes with one male 3-pin XLR connector. Available color options are black, red, blue and yellow. If you need a specific color, please leave a note during checkout. Otherwise we will randomly ship you one. 

5. Without cable and connector: you will get the probe head only in this option. 

Note 1: Click here to see all of our sensor cable options
Note 2: Silicone gasket/cap for this probe connector is available here.

Specifications:

Accuracy Class A. +/-0.15 °C at 0.0 °C
Alpha 0.00385
Maximum temperature 120 ºC (248 ºF)
Sensor Tip Cable Length 70 mm (2 3/4") or 170 mm(6 11/16")
Sensor Tip Length 10.4mm (13/32")
Sensor Tip OD 4mm (5/32")

 


This product was added to our catalog on Wednesday 03 December, 2014.

Copyright © 2024 auberins.com.