Mini Power Relay SPDT 120V 30A

  • Model: R30A

Ask a Question

$9.45

Add to Cart:

This relay provides a simple and economical solution for switching any size 120V operated heater or motor. It is single pole, compact, C-form (one normal open, NO, and one normal close, NC), 120VAC coil voltage, and rates up to 30A of load. It is shipped with 5 insulated connectors as shown in the picture. The output connector is good for 14 ~ 16 AWG wire. 

  

Compared to ice cube relays, this relay is more compact and epoxy sealed. All the connections are recessed. When connected with insulated connectors, it can be operated outside of the controller box.

Compared to using an SSR, the advantage of this relay are its compact size, no need for heat sink, no heat dissipation issue, real dry cut off and economical price. The disadvantage is limited life time and having to be switched at lower frequency than the SSR. If you don't need super high precision control (within 1 degree) and don't mind a small clicking sound, this relay is a better choice than the SSR. 

For wholesale customers, please contact us

Specifications

Type Power Relay
Nominal Coil Voltage 120V
Contact Form SPDT (1 Form C)
Relay Type 1xNC, 1xNO
Life Expectancy Mechanical 1 x 107
Electrical 1 x 105at 30 A 120 VAC Res. N.O.
Contact Max Current 30/20A (N.O./N.C.) at 277VAC, General Use
20/10A (N.O./N.C.) at 28VDC
2/0.5HP (N.O./N.C.) at 250VAC
1/0.25HP (N.O./N.C.) at 125VAC
20/60 (FLA/LRA) at 277VAC 30k cycles N.O.
10/33 (FLA/LRA) at 277VAC 30k cycles N.C. 
Termination Style Quick Connect
Pin Count 5
Operating Temperature -55 to 85 °C (-67 to 185 °F)
Minimum Dropout Voltage >24VAC
Pick-Up Voltage 102 VAC
Mounting Flange Mount
Dimension 50.2 x 27.5 x 27.8mm (1.97 x 1.08 x 1.09 inch)
Certification UL, CUR file E44211
Manufacturer Part# AZ2280-1C-120AF

This product was added to our catalog on Friday 17 February, 2012.

Copyright © 2024 auberins.com.