Digital Auto Gauge (Round) with Oil / Water Temperature Sensor

  • Model: Combo-MR-OWT

Ask a Question

Starting at: $98.00

Please Choose:





Longer Cable Option




Add to Cart:

This round multi-functional auto gauge (SYL-1813-MR) is essentially a SYL-1813 gauge but fitted in a conventional round metal case. Comparing to our 1/32 DIN sized SYL-1813 gauges, the new round appearance matches with other round gauges on the instrument panel. It is also easier to be mounted to an A-pillar pod.   

Front Panel Side View of the Mounting Bracket Wiring Terminals
LED display colors that are available: white, blue, green, and red.

This digital automobile gauge can be used to measure temperature, pressure and other important parameters, such as battery voltage and air/fuel ratio. Its bright LED display is easy to read from a distance compared to many dim LCD type digital gauges. The programmable alarm will turn on a blue LED in the front panel to get the driver's attention if the temperature/pressure is above the setting point. It will also close a relay output port that can be used to turn on a buzzer, shut off the fuel, or turn on a cooling fan. The meter stores the peak temperature/pressure with time stamps that can be checked later. It can also operate in the peak holding mode so that only the maximum value is displayed. The brightness of the LED display can be synchronized with headlights. When the headlight is turned on at night, the display will be dimmed by the illumination signal. It can also be dimmed directly on the key pad. Developed based on industrial grade instruments, this four digits gauge offers up to 10 times the resolution and accuracy of most 3 digits gauges on the market. The gauge also includes a cold junction compensation circuit to further reduce the temperature drift when a thermocouple sensor is used. (Please note: each gauge can only be set to measure one type of parameter at a time. It can't measure multiple parameters simultaneously).

The gauge is supplied with your choice of an oil/water temperature probe. The probe has 1/8" NPT thread. Two probe lengths are offered: 34 mm (1.34") and 22 mm (0.87").  The default cable length is 78” (2 meters). If you need a longer cable, please select the 4 meter cable option. The maximum working temperature of the sensor is 250ºC (500ºF). For more details of the specs, please see our listing for P18NPT50 and PT100A-NPT

P18NPT50 PT100A-NPT

SYL-1813-MR Gauge Specifications:

Input type Temperature Sensor, K, E, S, R, J, T, B, WRe3-WRe25, Pt100, Cu50
Pressure transducer, 0-375 ohm, 0-5 V, 0-75 mV
Other transducer: 0-30 mV, 1-5 V, 0-10 V, 0-10 mA, 0-20 mA, 4-20 mA
Display One lines, Four digits. °F or °C, Bar, PSI, or user defined
Display resolution 1°C, 1°F
Display brightness control 12 V illumination control signal, or key pad
Accuracy ±0.2% or ±1 unit of full input range
Control mode On/Off
Control output Relay contact: 3A at 240VAC
Alarm Relay (3A rating) high/low alarm
Recording function Maximum, Max time, Minimum, Min time.
Recording time 100 hrs with 1 minute resolution.
Power consumption <2 Watt
Power supply voltage rating 12 (8.5~16.5) VDC 
Panel cutout dimension 52 mm diameter (2 1/16 inch)
Dimension 60 x 60 x 59 mm 

Click here for instruction manual of SYL-1813-MR
Click here for water/oil temperature sensor application guide
Click here for instruction manual of oil/water sensor installation guide


This product was added to our catalog on Monday 13 November, 2017.

Copyright © 2024 auberins.com.