Flashing Buzzer, 12 V DC/AC. 16 mm

  • Model: FLBuz-12

Ask a Question

Starting at: $6.95

Please Choose:

Accessories




Add to Cart:

This flashing buzzer can alert the user if the temperature is too high or too low when connected to the Auber Automobile Multimeter or 12V powered PID controller's alarm output.  When the alarm conditions are met, the buzzer will beep and flash with a red light. It is designed to be mounted on a panel with a 16 mm mounting hole. It is powered by either 12 VDC or 12VAC. 

Please watch the following demo video. In this example, the buzzer is connected to the gauge's high limit alarm. It will turn on when the temperature reaches 900 degrees and off when the temperature is below 898 degrees.

Note: if you want to use this buzzer with your AT200CHIM/AT210 thermometer, one cable with a connector is needed. Please check the buzzer cable option above.  

Specifications:

Mounting Cutout 16 mm (0.63")
Life ≥30000 hours
Brightness 40 ~ 60 cd/sq. m
Voltage range ±20%
Dielectric Strength 2.5 kv
Front diameter 19.2 mm (0.75")
Total length 55 mm (2.15")
Insertion Length from the front panel 45 mm (1.75")
Buzzer Level (10 cm away) 85 dB
Cable Length 4 ft (1.2 meters)

This product was added to our catalog on Sunday 22 May, 2011.

Copyright © 2024 auberins.com.