Medium Box for 1/32 DIN Controller 3x1.4x4.7"

  • Model: MBox32

Ask a Question

$18.95

Add to Cart:

This project box is for 1/32 DIN controllers and pyrometers including SYL-1512A, SYL-1612B, SYL-1812RA, SYL-1813R, SYL-1813G, SYL-1813B, and SYL-1813A. It is longer and wider than our SBOXS and SBOXB. The box can be open from the top by removing the upper half of the box.  This feature allows easy wiring and small component to be installed in the middle of the box. The box has enough space for a 1/32 DIN controller, a small single toggle switch, and a small 5A SSR or relay.  

The box is made of extruded aluminum with bright anodized finish. The front panel is pre-cut to fit the 1/32 DIN controller.  The outer dimensions of the box are 76 x 35 x 120 mm or 3'' x 1.38 x 4.73” (W x H x L). Both the front panel and back panel are mounted to the body by M3 screws (8 x M3).

Click here for how to cut the instrument panel

A assembled and a opened MBox32.

A disassembled MBox32.

An example of using MBox32 as the enclosure for a 1/32 DIN controller. 


This product was added to our catalog on Monday 05 May, 2014.

Copyright © 2024 auberins.com.